All AC voltages are supported by the adapter. A suitable AC power cable may need to be sourced locally to suit country specific plugs. The PS336 handheld is supplied in a cardboard box which includes the handheld device, battery, charging adapter and EU power cable. Do not disconnect from power until the green FULL indicator flashes, indicating that the battery is fully charged.
Insert a battery into the ZCH201 charger and plug the adapter into an AC supply. Download the files and store them on the provided MicroSD card in the SYSTEM folder 2.2 BATTERY CHARGING Before using the receiver, the included ZBA201 batteries should be charged. The Getac PS336 User Manual can be downloaded from Getac s website, at Zenith15/25 GNSS Series - 3 -Ĥ 2 GENERAL PREPARATION 2.1 COPY ZENITH15/25 FIRMWARE ON MICROSD CARD Visit GeoMax Downloads to check for the current versions of both System and GNSS firmware s. The User Manual for the GNSS receiver is available from the Zenith15/25 Pro CD and also from the GeoMax Partner Area. For further information regarding the operation of the Zenith15/25 Pro components, please refer to the respective User Manuals.
Only the tasks required for the initial setup of a new Zenith15/25 Pro system are described in this document. The instructions cover all the required installation tasks for the Zenith GNSS receiver, Getac PS336 handheld and FieldGenius/ Layout Pro software. 1 GeoMax GNSS Zenith15/25 Pro Series Version 3.00 English Zenith15/25 GNSS Series - 1 -Ģ Tablet of Contents 1 INTRODUCTION 2 GENERAL PREPARATION 2.1 Copy Zenith15/25 Firmware on MicroSD card 2.2 Battery Charging 3 PREPARATION OF THE GNSS RECEIVER 3.1 Connecting to the PC 3.2 Receiver connection with GeoMax Assistant 3.3 Checking the receiver firmware version 3.4 Changing the UHF radio settings 3.5 Antenna Management 3.6 Installation of licences 3.7 Disconnecting from the PC 4 PREPARATION OF THE HANDHELD 4.1 SETTING UP WINDOWS MOBILE 4.2 Connecting to the PC 4.3 Installation of FieldGenius/ Layout Pro 4.4 Registration of FieldGenius/ Layout Pro 4.5 Connection to the GNSS receiver 5 EQUIPMENT SETUP 5.1 Rover setup 5.2 Base setup Zenith15/25 GNSS Series - 2 -ģ 1 INTRODUCTION This guide provides complete step-by-step instructions for preparing the Zenith15 and Zenith25 Pro GNSS series for measuring work.
0 kommentar(er)
